Chasing a fiber fault, and the cameras on that same run need testing too?
The MT-8810EFST combines a full OTDR fiber tester with a complete CCTV camera tester in one handheld device — so you can trace a fiber break, then verify the cameras on that link, without switching tools.
WANLUTECH has been manufacturing CCTV testers and OTDRs for over 10 years, and is the OEM factory behind many other CCTV tester brands on the market today.
What this tester does for you
✅ Full OTDR fiber testing (1310/1550nm, 28dB/26dB)
(Note: this model does not support testing live fiber.) Event Map visualizes the fiber link so you can spot faults immediately, with a tight event dead zone (≤0.8m) and attenuation dead zone (≤3m) for precise fault location. Save test curves and export reports as PDF, Excel, or standard SOR files.
✅ Optical power meter, visual fault locator & light source
Measure fiber link loss, spot breaks or bends with the 650nm visual fault locator (up to 8km range), and use the built-in light source for insertion loss testing.
✅ Test every camera type on the same job
Test IP cameras up to 8K 32MP plus SDI, TVI, CVI, AHD, and CVBS analog signals — with batch activation and IP/password setup for Hikvision and Dahua cameras built in.
✅ 90W PoE output
Temporarily power high-draw PTZ cameras and other 802.3af/at/bt devices directly from the tester.
✅ Cable tracer, TDR & built-in multimeter
Trace BNC, network, or telephone cable out of a cluttered bundle, run TDR breakpoint testing on copper runs up to 1.2km, and check voltage, current, resistance, and continuity — all without a separate meter.
✅ 8" touchscreen with full network toolkit
Ping, IP scan, port flashing, LLDP, link monitor, WiFi analyzer, dual gigabit ports, HDMI in/out, and VGA in are all built in — plus an SFP port for fiber network testing.
Quick specs
- OTDR: 1310/1550nm 28dB/26dB (live fiber testing not supported)
- Fiber tools: OPM, VFL (650nm, up to 8km), Light Source, Event Map, SOR/PDF/Excel report export
- Camera signal support: IP (8K 32MP) / SDI / TVI / CVI / AHD / CVBS
- Touchscreen: 8" (1920x1200)
- PoE output: up to 90W (802.3af/at/bt)
- Cable testing: RJ45 TDR (up to 1.2km), digital cable tracer, breakpoint/short circuit test
- Multimeter: DC/AC voltage & current, resistance, continuity, diode, capacitance
- Ports: Dual Gigabit Ethernet, HDMI in/out, VGA in, RS485
Please note: there's a paper strip isolating the battery on first use — open the battery cover and remove it before powering on.
Need the full spec sheet? Download the User Manual here.
