OTDR Fiber Optic Tester
WANLUTECH's OTDR combines essential fiber optic testing in one handheld device. Wavelength: 1310nm/1550nm, dynamic range 28dB/26dB. Quick Setup mode lets you set wavelength, distance range, pulse width, and duration in seconds; Parameters Set mode gives professional technicians full control over wavelength, distance range, pulse width, measurement mode, IOR, and thresholds for more accurate curve results. Also supports maintenance and installation of 4K IP cameras, analog cameras, and HD coaxial (8MP AHD/CVI/TVI) cameras.
OPM / VFL / LS / OLS / Event Map
OPM (Optical Power Meter, calibrated for 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm), VFL (Visual Fault Locator, 650nm, up to 8km), LS (Light Source: CW/270Hz/330Hz/1kHz/2kHz), OLS (Optical Loss Test for passive devices), and Event Map to visualize, save, and review fiber link test curves. Event Dead Zone ≤0.8m, Attenuation Dead Zone ≤3m.
4-in-1 CCTV Camera Tester & Cable Tester
Tests up to 4K/12MP IP cameras and CVBS analog cameras, plus 8MP AHD/TVI/CVI cameras. Batch-activates Dahua/Hikvision cameras and modifies IP addresses and passwords. "AUTO HD" mode auto-detects AHD/CVI/TVI cameras and displays resolution and frame rate, with UTC control, OSD menu access, screenshots, and video recording/playback. RJ45 Cable TDR Test checks cable pair status, length, attenuation, reflectivity, impedance, and skew. Cable Tracer locates BNC, network, and telephone cables in cluttered bundles.
Network Tools, PoE & WiFi Analyzer
Built-in tools include Ping, IP Scan, DHCP Server, PPPoE, Traceroute, Port Flash, LLDP, and Link Monitor. PoE Detection measures switch/PSE voltage and cable connection status (IEEE802.3af/at, up to 48V, 30W output). WiFi Analyzer supports 2.4GHz connection, scanning, and signal strength detection.
Multi-Function Design
5.4" IPS touchscreen (1920×1152), gigabit Ethernet port, HDMI in, VGA in, audio in/out, RS485 port. Power output: DC24V/2A, DC12V/3A, DC5V/2A.
Before First Use
A paper insulator separates the battery — open the battery cover and remove it before powering on.
