OTDR Fiber Optic Tester: Wavelength 1310nm/1550nm, dynamic range 28dB/26dB. Quick Setup mode quickly sets wavelength, distance range, pulse width and measurement duration; Parameters Set mode lets professional technicians configure wavelength, distance range, pulse width, measurement mode, IOR, non-reflection threshold, end threshold and other parameters for more accurate curve results. (Note: this 1310nm/1550nm model does not support live fiber testing.)
OPM / VFL / LS / OLS: Combines essential fiber optic testing in one handheld device. OPM (Optical Power Meter: calibrated wavelength 850/1300/1310/1490/1550/1625nm, measurement range -70~+10 dBm); VFL (Visual Fault Locator: 650nm wavelength, max test range 8km); LS (Light Source: CW/270Hz/330Hz/1kHz/2kHz modes); OLS (Optical Loss Test: tests insertion loss of optical passive devices).
Event Map & Data Storage: Visualizes fiber optic link inspection results — link length, connector type, fusion point, or break point — as easy-to-read graphs. Save and review testing curves with zoom and pan. Event dead zone ≤0.8m, attenuation dead zone ≤3m. Generate test reports including curve trajectory graphs, parameter settings, and fiber event/link information, in SOR/PDF/EXCEL formats.
Cable Tester & Network Tools: Digital cable tracer for BNC, network, telephone, and shielded cables. RJ45 cable TDR test (open/short circuit status, length up to 600m). UTP cable tester with near/mid/far-end fault detection. Network tools include Ping test, IP scan, FTP file management, PPPoE, port flashing, LLDP, and link monitoring.
Multifunction Fiber Tester: 5.4" IPS touchscreen. Connectors: SC/UPC, FC/UPC, ST/UPC, LC/UPC adapters, FC-FC, FC-SC, FC-LC, and SC/UPC-SC/APC adapters, plus an FC/UPC-FC/APC patch cord. Built-in 7.4V 5200mAh battery, one Gigabit Ethernet port (10/100/1000Mbps adaptive), 2.4G WiFi (150Mbps, WiFi analyzer, hotspot creation), PoE detection, DC12V/1A input, DC5V/2A output.
Please Note: A paper insulator separates the battery before first use — open the battery cover and remove it before powering on. We are the manufacturer; questions are answered within 12 hours.